UCL Discovery Stage
UCL home » Library Services » Electronic resources » UCL Discovery Stage

Accuracy of computed radiography in osteometry: A comparison of digital imaging techniques and the effect of magnification

Carew, RM; Viner, MD; Conlogue, G; Márquez-Grant, N; Beckett, S; (2019) Accuracy of computed radiography in osteometry: A comparison of digital imaging techniques and the effect of magnification. Journal of Forensic Radiology and Imaging , 19 , Article 100348. 10.1016/j.jofri.2019.100348. Green open access

[thumbnail of Carew_Manuscript_Minor Revisions_plain text.pdf]
Preview
Text
Carew_Manuscript_Minor Revisions_plain text.pdf - Accepted Version

Download (1MB) | Preview

Abstract

Introduction: Osteometric data may be obtained using digital imaging techniques, such as post-mortem computed tomography (PMCT) and digital radiography, non-invasively and without ethical objection. Osteometric data from PMCT is known to be as accurate as taking direct measurements. Digital radiography is more accessible and affordable than PMCT but is limited due to the magnification of its subjects. / Objectives: To investigate the viability of implementing digital radiographic techniques for measurement of long bones, and to establish whether magnification can be accurately corrected for. / Materials and Methods: Twenty hind pig (Sus scrofa) legs were imaged using computed radiography (CR) and PMCT, and osteometric data obtained from the digital images and 3D CT volume reconstructions. Direct measurements were taken following maceration. A calibration object was imaged using CR, to provide magnification correction factors. / Results: Accuracy was determined by mean absolute error (AE), giving values of 3.3 ± 2.5 mm for PMCT (MPR), 2.4 ± 1.3 mm for PMCT (3D), 11.1 ± 7.4 mm for CR (PA), and 18.3 ± 14.5 mm for CR (LAT). PMCT data was more accurate than CR data. Through applying correction for magnification, CR data became closer to the direct measurement data, and stature estimation was substantially altered. / Conclusion: Magnification in computed radiography affects osteometric data and resulting stature estimations. Applying correction factors may be a viable option for improving accuracy. For digital radiography to be used reliably in forensic anthropology, further empirical research is needed to validate a magnification correction method.

Type: Article
Title: Accuracy of computed radiography in osteometry: A comparison of digital imaging techniques and the effect of magnification
Open access status: An open access version is available from UCL Discovery
DOI: 10.1016/j.jofri.2019.100348
Publisher version: https://doi.org/10.1016/j.jofri.2019.100348
Language: English
Additional information: This version is the author accepted manuscript. For information on re-use, please refer to the publisher’s terms and conditions.
Keywords: Forensic anthropology, Osteometry, Stature estimation, Forensic imaging, Digital imaging, Multi-detector computed tomography, Post-mortem computed tomography, Computed radiography, Identification
UCL classification: UCL
UCL > Provost and Vice Provost Offices
UCL > Provost and Vice Provost Offices > UCL BEAMS
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Security and Crime Science
URI: https://discovery-pp.ucl.ac.uk/id/eprint/10093493
Downloads since deposit
13,680Downloads
Download activity - last month
Download activity - last 12 months
Downloads by country - last 12 months

Archive Staff Only

View Item View Item