Biffi, B;
Bosi, GM;
Lintas, V;
Jones, R;
Tzamtzis, S;
Burriesci, G;
Migliavacca, F;
... Biglino, G; + view all
(2016)
Numerical model of a valvuloplasty balloon: in vitro validation in a rapid-prototyped phantom.
BioMedical Engineering OnLine
, 15
, Article 37. 10.1186/s12938-016-0155-4.
Preview |
Text
Numerical model of a valvuloplasty balloon: in vitro validation in a rapid-prototyped phantom.pdf - Published Version Download (2MB) | Preview |
Abstract
BACKGROUND: Patient-specific simulations can provide insight into the mechanics of cardiovascular procedures. Amongst cardiovascular devices, non-compliant balloons are used in several minimally invasive procedures, such as balloon aortic valvuloplasty. Although these balloons are often included in the computer simulations of these procedures, validation of the balloon behaviour is often lacking. We therefore aim to create and validate a computational model of a valvuloplasty balloon. METHODS: A finite element (FE) model of a valvuloplasty balloon (Edwards 9350BC23) was designed, including balloon geometry and material properties from tensile testing. Young's Modulus and distensibility of different rapid prototyping (RP) rubber-like materials were evaluated to identify the most suitable compound to reproduce the mechanical properties of calcified arteries in which such balloons are likely to be employed clinically. A cylindrical, simplified implantation site was 3D printed using the selected material and the balloon was inflated inside it. The FE model of balloon inflation alone and its interaction with the cylinder were validated by comparison with experimental Pressure-Volume (P-V) and diameter-Volume (d-V) curves. RESULTS: Root mean square errors (RMSE) of pressure and diameter were RMSE P = 161.98 mmHg (3.8 % of the maximum pressure) and RMSE d = 0.12 mm (<0.5 mm, within the acquisition system resolution) for the balloon alone, and RMSE P = 94.87 mmHg (1.9 % of the maximum pressure) and RMSE d = 0.49 mm for the balloon inflated inside the simplified implantation site, respectively. CONCLUSIONS: This validated computational model could be used to virtually simulate more realistic valvuloplasty interventions.
| Type: | Article |
|---|---|
| Title: | Numerical model of a valvuloplasty balloon: in vitro validation in a rapid-prototyped phantom |
| Location: | England |
| Open access status: | An open access version is available from UCL Discovery |
| DOI: | 10.1186/s12938-016-0155-4 |
| Publisher version: | http://dx.doi.org/10.1186/s12938-016-0155-4 |
| Language: | English |
| Additional information: | This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated. |
| Keywords: | 3D printing/rapid prototyping materials, Implantation site material properties, Percutaneous procedures, Validation of computational models, Valvuloplasty balloons |
| UCL classification: | UCL UCL > Provost and Vice Provost Offices > School of Life and Medical Sciences UCL > Provost and Vice Provost Offices > School of Life and Medical Sciences > Faculty of Population Health Sciences > Institute of Cardiovascular Science UCL > Provost and Vice Provost Offices > School of Life and Medical Sciences > Faculty of Population Health Sciences > Institute of Cardiovascular Science > Childrens Cardiovascular Disease UCL > Provost and Vice Provost Offices > UCL BEAMS UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Mechanical Engineering |
| URI: | https://discovery-pp.ucl.ac.uk/id/eprint/1479195 |
Archive Staff Only
 |
View Item |
